mounting a tv when studs are too far apart

Schiffmann50860 May 25, 2022 apart , far , studs , when Comment

Mounting a heavy TV mount. Mounting on old drywall and plaster can be problematic especially if the material is crumbling away or your wall studs are improperly spaced.

Tv Wall Mount Studs Too Far Apart Here S What You Can Do Upgraded Home

The first option you can consider is to construct a Plywood mounting plate.

. Could probably get away with a 1x4. I was thinking about cutting 2 30 2x4s and drilling those into the studs and then securing the mount to the 2x4s running horizontally. The studs above my fireplace are 16 apart but theres one stud about 2 off center of the center of the fireplace.

Answer 1 of 4. I have not installed it yet because I am hesitant to mount it to one stud. Use the television mount template to line up the mounts holes on the wall.

I ordered a TV wall mount online last week without checking my studs first. Ad Add a Wall Mounting Bracket to Your Flat Panel Television for a Clean Modern Look. I would get a piece of 34 plywood cut it to about 20 wide and the height of the wall mount plate.

Unfortunately this mount is for 16inch studs and my townhouse has 24 inch studs. I can mount my bracket on one stud and I purchased some drywall mounts that are supposed to hold 300 lbs according to the package. If I mount the bracket so that theres a stud on either side Ill end up with a TV significantly off center.

Studs too far apart. Connect With Top-Rated Local Professionals Ready To Complete Your Project on Houzz. The easiest but not the most effective is to cut a piece of 34 plywood maybe a nice piece of 13 ply birch 34 long and attach it to both studs with screws.

Well Send One Of Our Techs To You. TV Wall mount studs too far apart. This step will make things a bit easier.

The other way is to go in from the other side of the wall if its a closet and actually open the sheetrock up and. Take the stud finder and move it across the wall. The whole point of the answer that I posted was about having the 34 inch plywood large enough to be 1 larger than the TV bracket and 2 extend across at least two if not three studs 3 the plywood securely screwed into those studs with multiple strong screws at each stud and finally 4 mount the TV bracket to said.

Take the bottom plank and slip it behind the wall mount and screw it in place. Studs that are too far apart can also create problems because the material between them will actually bow in some cases. That would give you a pretty solid base.

They will usually be either 16-inches or 24-inches apart. Construct a Plywood Mounting Plate. Place where the TV has to be mounted has studs that are too far apart more than 24.

It would have to be at least as tall as your TV mounting brackets. Now move forward horizontally from that spot until you find another stud. I want to mount a 70 tv 68lbs to a wall but all the wall mounts I find need to be mounted between studs.

Then screw the plywood to both studs with 3 screws then attach the TV mount the plywood. If the other locations in your house also have studs that are too far apart then youll have to figure out some other way to mount your TV to the wall. Studs are too far apart for tv mount Written By claudstageman87715.

Tried mounting my tv last night and realized that the studs are about 3 inches to far apart for the mount the tv came with. I would like to mount my TV directly in the center of two windows in our basement. Saw a house that had a 2x4 mounted on the studs then the tv mount on the 2x4.

Mark the area where the stud finder locates a stud. Now make sure that it is flush with the top plank by put the leveler on the sides. I had the same issuetherefore the I went to the lumber yard and purchased a board 1x 10 x 8 feet long which is standard in North American lumber yard I measure the width of my TV cut the board approx 6 inches shorter than TV width thenmake sure you have at least 4 heav.

Since 1974 Weve Been Helping Customers Choose Use and Enjoy Audio Video and More. Jul 11 2016 at 1038. Use at least one stud and then a couple of drywall anchors.

Using Drywall Anchors that are Insufficient for the TVs Weight. I figure i can fit 8 15 bolts from the mount to the 2x4 and 4 6-8 bolts into the. I really dont want to return this mount because it was a good price the type I wanted full swivel and tilt and I cant find a similar one to it for.

Ad Hide Those Ugly Wires. Measure the distance between the two studs to find out how far apart they are. Ad Find And Compare Local TV Installation Services For Your Job.

Now that its attached you can drill in the holes for the bottom plank into the studs. There is only one stud available where I would like to mount my TV shown. I also have paneling over the drywall.

Mounting A Tv On Studs That Are Too Far Apart R Homeimprovement